Skip to content

Nitecore NU05

8.000 KD

NU05 Specifications

  • LED: Four High-Performance LEDs (2x White & 2x Red)
  • Battery Supported: Built-in 3.7V - 120mAh Li-ion Battery
  • Modes: 4 ─ White Light Illumination, White slow blink, Red quick blink, Red slow blink
  • Brightness Outputs:
    • Red Slow Blink: 4 Lumens / 9 hours
    • Red Quick Blink: 4 Lumens / 9 hours
    • White Slow Blink: 35 Lumens / 2 hours 15 minutes
    • White Light Illumination: 35 Lumens / 2 hours 15 minutes
  • IP Rating: IP-66 Water-resistant
  • Impact Resistance: 1.5m
  • Dimensions:
    • Height ─ 29.5mm (1.16")
    • Width ─ 30.3mm (1.19")
    • Length ─ 16.3mm (0.64")
  • Weight: 10.4g (0.37oz)

NU05 Features

  • Utilizes 4 high performance LEDs
  • Dual white and red light sources
  • Built-in rechargeable Li-ion battery with max runtime up to 20 hours
  • Built-in intelligent Li-ion charging circuit for Micro-USB charging
  • Simple one switch control for one-handed operation
  • 4 special modes selectable
  • Built-in power indicator to indicate remaining power level (Patent NO.: ZL201220057767.4)
  • Constructed from durable and sturdy PC material
  • Ultra-lightweight design for extreme portability
  • 1.5 meters impact resistance

Operation Notes

Operating the NU05 is done via the single-button user interface. Press the button once to turn the NU05. By default, the NU05 will be in red indicator mode. Pressing the button again within 3 seconds will cycle through red light (slow) - red light (fast) - white light (slow) - white light (steady). After three seconds of inoperation, pressing the power button again will put the NU05 in standby.

Lockout Mode

To prevent accidental activation, the NU05 has a lockout mode. Press and hold the power button for 1 second and the red indicator light will blink once to indicate lockout mode. To exit lockout mode, press and hold the button for three seconds until the red indicator light begins flashing.